Danfoss C17, Installer'S Manual

Page: 18 / 65

Installa
tion
How to insert your ECL Card the first time
After the power has been switched on, open the lid on the
front side of the controller.
Place the ECL Card with the yellow side facing you. This
enables the controller to read the ECL Card data. The
controller immediately starts to copy the application type
and factory settings from the ECL Card. After copying, the
display will show you the application type. After approx. 10
sec. the display will change to display line C.
Display example:
Software
version, ECL
Card
Line
Circuit
Time
Outdoor
temp.
C
C 9 9
Y
0
P
C 7 3
05 109
8
0 3 6 9 12 15 18 21 24
1
0 2 3
5
C
3
Application type
Software version,
controller
Desired room temp.
The controller is now ready to be set to control your system.
If the display keeps showing
CPY
, see section 34b.
Inserting the ECL Card
15a