Instruction
Disassembling and assembling APP S 674 2.0-3.5
4
180R9281 / 521B1275 / DKCFN.PI.013.C3.02 / 05.2013
5.
Remove ceramic ring from cover by
carefully pushing it from the back of the
sealing ring with a screwdriver.
6.
Clean and then wet the shaft with clean
water.
7.
Through the inlet port lever the shaft seal
with a screw driver between shaft seal and
spring. Use one hand to pull the shaft seal
up.
WARNING:
Be careful not to scratch the shaft.
8.
Carefully remove the shaft seal and
distance ring.
9.
Carefully remove the spring by lifting it
with a screwdriver and one hand to pull the
spring up.
10. Using a 8 mm allen key, unscrew all bolts on
the end flange.
