10 DKDHR
VI.GP.N2.02
Danfoss District Energy
Instructions Water
Heaters
Fig. 9
Demount capillary tube from T-piece.
Fig. 10
Mount m8 x 1 screw plug F in T-piece.
Fig. 11
Demount capillary tube from T-piece as shown.
Fig. 12
Mount support rail and tighten screws D with your screwdriver, as
shown.
Fig. 13
Fix locking rail to support rail.
Fig. 14
Fit new capillary tube G on nipple B by means of union nut and
cutting ring H. - Tighten with single end wrench
.
Fig. 15
Fit the other end of the capillary tube G on T-piece by means of
union nut and cutting ring H. - Tighten with single end wrench.
Fig. 16
Fix circulation hose end B2 and nipple E in bracket, as shown
Fig. 17 + 18
Cut out a section of the front insulation as shown, in order to be
able to fix the front insulation cover after mounting of circulation
pipe.
Fig. 13
Fig. 14
Fig. 15
Fig.16
Fig.11
Fig. 12
Fig. 9
Fig. 10
