manualshive.com logo in svg

Danfoss AKS 4100, Technical Brochure, Page: 13 / 16

Share
Download
Danfoss AKS 4100 Technical Brochure Download Page 13

© Danfoss A/S (AC-MCI/MWA), 2012-05 

DKRCI.PD.SC0.C3.02 / 520H5687 13

Liquid Level Sensor, AKS 4100/4100U

•   Connect the device to the power supply

 

  (see the product instruction for detail on  

  electrical installation/connection).

•   Press 

 3 times.

•   Press 

 

•   Press 

 or   to select between SINGLE 

  or COAXIAL. Choose COAXIAL and  

 press   to confirm. 

•   Press 

 (YES) to confirm

•   Press 

 to change GAS EPS.R. 

  (Select the correct value from the tables  

  on page 16) 

 Press   to change cursor- 

 position. 
  Press   to decrease the value or   to 

  increase the value.

AKS 4100

QUICK SETUP ?

YES                                           NO

AKS 4100

PROBE TYPE
SINGLE CABLE

•  

Press   to confirm.

•   Press 

 to change the PROBE LENGTH. 

 Press   to change the position of the  

 cursor. 

 

 Press   to decrease the value or   to 

  increase the value. 

 Press   to confirm. 

•   Press 

 to change of SCALE 4 mA. 

 Press   to change the cursor position. 

 Press   to decrease the value or   to 

  increase the value. 
 Press   to confirm. 

•   Press 

 to change of SCALE 20 mA. 

 Press   to change the cursor position. 

 Press   to decrease the value or   to 

  increase the value. 
 Press   to confirm.

•   Wait for QUICK SETUP to complete. 

 

  Count down from 8 sec.

•  

Press   to confirm.

•   Press 

 or   to select between  

  STORE NO or STORE YES.  

 Press   to confirm. 

 

Default screen appears:

 

Quick Setup  completed

You have the possibility of checking your 

settings by pressing   twice.

Press          to return to default screen.

Quick Setup (all values below are only examples)

•   Connect the device to the power supply

•   Press 

 3 times.

•   Press 

 

•   Press 

 or   to select between SINGLE 

  or COAXIAL. Choose COAXIAL and  

 press   to confirm.

•   Press 

 (NO) to confirm

AKS 4100

QUICK SETUP ?

YES                                           NO

AKS 4100

PROBE TYPE
SINGLE CABLE

•   Press 

 to change the PROBE LENGTH. 

 Press   to change the position of the  

 cursor. 

 

 Press   to decrease the value or   to 

  increase the value. 

 Press   to confirm. 

•   Press 

 to change of SCALE 4 mA. 

 Press   to change the cursor position. 

 Press   to decrease the value or   to 

  increase the value. 
 Press   to confirm. 

•   Press 

 to change of SCALE 20 mA. 

 Press   to change the cursor position. 

 Press   to decrease the value or   to 

  increase the value. 
 Press   to confirm.

•   Wait for QUICK SETUP to complete. 

 

  Count down from 8 sec.

•  

Press   to confirm.

•   Press 

 or   to select between  

  STORE NO or STORE YES.  

 Press   to confirm. 

 

Default screen appears:

  Quick Setup completed

AKS 4100

GAS EPS R ?

001.000

AKS 4100

PROBE  LENGTH

05000 mm

AKS 4100

SCALE 4 mA

04946 mm

AKS 4100

SCALE 20 mA

00070 mm

AKS 4100

QUICK SETUP 

COMPLETED IN 8

AKS 4100

1.0.0

QUICK START

AKS 4100

1.0.0

STORE NO

AKS 4100

DISTANCE

5000 mm

When CO

2

 is used:

For all other refrigerants:

AKS 4100

LIQUID CO2 ?

YES                                                              NO

AKS 4100

LIQUID CO2 ?

YES                                                              NO

AKS 4100

SCALE 4 mA

04946 mm

AKS 4100

SCALE 20 mA

00070 mm

AKS 4100

QUICK SETUP 

COMPLETED IN 8

AKS 4100

1.0.0

STORE NO

AKS 4100

DISTANCE

5000 mm

AKS 4100

1.0.0

QUICK START

AKS 4100

PROBE  LENGTH

05000 mm

COAXIAL version

AKS 4100

QUICK SETUP ?

YES                                           NO

AKS 4100

QUICK SETUP ?

YES                                           NO

AKS 4100

COAXIAL

2200 mm

(0 %) 4 mA

1900 mm

(100 %) 20 mA

70 mm

Summary of Contents for AKS 4100

















Reviews:

No comments