3.
Replace 2 screws in the remaining 2 corners of the
fan, securing each with a nut (7 mm).
4.
Reconnect the in-line cable connector attaching the
fan cable.
5.
Replace the filter over the fan on the outside of the
door.
6.
Reposition the fan grill over the filter and press to
snap into place.
1
Front grill
5
Door fan front view
2
Release tab
6
Nut (7 mm)
3
Fan filter
7
Corner bracket
4
Screw (T20)
8
Door fan back view
Illustration 1.1 Door Fan Assembly
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss
and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
*MI35M202*
MI35M202
130R0766
03/2018
