Danfoss 176F4170, Installation Manual

Page: 3 / 6

1.
2.
2.2 Replacing the Side Brackets
Before installing the ground bar, use the following steps to replace the existing brackets with the brackets from the kit.
Remove the existing side brackets by removing 2 screws (T25) from the cabinet exterior, 1 from the left bracket and 1 from
the right bracket. See
Illustration 1 .
e3
0b
k1
97
.1
0
Illustration 1: Removal of Existing Side Brackets
Attach the new left bracket by fastening 1 M5x12 screw (T25) through the side panel of the cabinet and into the bracket.
Repeat for the right bracket.
The left and right brackets differ from each other. See Illustration 2 for the positioning of each bracket.
AN422434236428en-000201 / 136R0288 | 3 Danfoss A/S © 2022.10
Installation
Ground Bar Kit for FK09/FB09 and FK10/FB10
Installation Guide