2
DKRCI.PI.FO0.A1.02 / 520H2518
© Danfoss A/S (AC-AKC / frz), 11-2007
Cutting of rectangular hole in the electrical box.
Making of holes to drill in the electrical box and final assembly.
Four holes
EKC
DIN Rail
Front panel
Metal mounting parts
Thread cutting screws
Install the front panel from outside of the electrical box.
Install the metal mounting parts on top of the front
panel from inside of the electrical box.
Mark the four 4,5 mm (11/64 in.) holes
Assemble front panel and metal mounting parts with the
4 pcs of thread cutting screws.
Please observe that EKC can be installed by removing the
2 screws that holds the DIN rail.
