User manual for DM700 ECDIS hardware
Copyright Danelec Marine A/S
MAN11804-10
Page 12/30
Click on “Standby”
and click on
[Standby]
.
3.2.2 Hardware standby
Note:
The procedure described in this section should only be used if the ECDIS software freezes or
stops responding to user input.
Press and hold the POWER button on the monitor HMI for 7 seconds in order to shut down the
ECDIS computer.
3.3 ECDIS computer restart
Press POWER button in the monitor HMI in order to restart the computer. This is applicable both
after a “hard” shutdown (see
section 3.2 “ECDIS computer shutdown”
) or if the ECDIS is in
standby after the software has been closed normally.
