Danelec DM700 ECDIS, Installation Manual

Page: 17 / 67

Installation manual for DM700 ECDIS
Copyright Danelec Marine A/S
MAN11805-10 Page 17/67
5 System configuration
The following steps must be done
Initial Configuration of the master ECDIS
1. Configuration of monitor type
2. Configuration of alert buzzer
3. Configuration of mouse/trackball
4. Configuration of cluster size, node id and role
5. Configuration of external network
6. Configuration of external equipment
7. Configuration of serial ports
8. Saving initial configuration
Initial Configuration of the backup ECDIS
9. Same procedure as for Master ECDIS
Initial Configuration of the planning station
10. Same procedure as for Master ECDIS
Final configuration of the Master ECDIS
11. Configuration of access to remote port
12. Saving final configuration
13. Configure USB hardware key as primary key (Master ECDIS only)
Final configuration of the backup ECDIS
14. Same procedure as for Master ECDIS
Final configuration of the planning station
15. Same procedure as for Master ECDIS
5.1 Power up of ECDIS
1. Connect DC Power from the Wave monitor
2. Apply AC power to the Wave monitor
3.
If the “POWER”-LED on the front of the DM700 ECDIS is not lit, press the Power button
on the Monitor HMI briefly.