Dane Technologies, Inc.
QuicKART
Owners Manual
6
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
970-047
REV
B 2-9-09
when those conditions are present.
Do not exceed 30 carts at a time under any
circumstance. Refer to your store policy for the maximum cart number.
12. Verify all warning and emergency labels are legible and mounted in correct areas
shown on drawings starting on page 26.
13. Do not drive over curbs or the edges of hardened surfaces higher than one inch.
14. Always look behind the QuicKART before and while operating in reverse.
15. Batteries must be fully charged initially before using the QuicKART.
16. The electrolyte in a storage battery is an acid, which can cause severe burns to the
skin and eyes. Wear appropriate protective clothing when working with batteries.
Treat all electrolyte spills with an extended flushing with clear water. Contact a
physician immediately if contact is made with battery acid.
17. Three types of batteries may be used in the QuicKART: Standard, Maintenance free
and AGM. Please check your batteries to see which kind you have, the standard
battery needs maintenance, and the others do not.
a. Standard batteries do require regular maintenance. Check the batteries
weekly to add distilled water to the batteries.
b. Maintenance free batteries contain liquid and may have caps for filling and
very rarely need filling.
c. AGM batteries have no free liquid and do not require maintenance.
18. Hydrogen gas is formed when charging the batteries. Use a location with adequate
ventilation when charging QuicKART batteries. Never smoke near batteries. Do
not charge batteries in an area with open flame or where there is electrical
equipment that could cause an electrical arc.
19. Do not lay metal objects (wrenches, screwdrivers, etc.) on any of the batteries to
prevent electrical short circuits.
20. Batteries are heavy. Always use care and proper lifting technique to avoid injury
when removing or replacing batteries.
21. Make sure QuicKART is properly secured when changing tires. (See instructions
on page 40.)
22. An optional strap is available to tether the carts together. To view the procedure to
strap the carts see the illustration on page 29.
UNPACKING THE QUICKART M3, M3 E, M3 HD
1)
The QuicKART M3, M3 E, M3 HD is typically shipped on a wooden pallet. It
may come with addition individual components that are packaged inside the
QuicKART. Care must be taken not to damage
them during the unpacking. The components are:
a)
QuicKART
, the basic electric machine
with two keys,
b)
A box including:
a Remote Control
Transmitter, to remotely control the
QuicKART, and Cart Coupler Hardware
(yokes for the cart coupler).
c) Options may be strapped to the pallet.
