Dane Technologies, Inc.
QuicKART
Owners Manual
57
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
970-047
REV
B 2-9-09
QUICKART M3-M3 HD QUIZ
Your Name: ______________________ Date: _________ Store Location: ______________
1. The approximate maximum number of shopping carts that should be pushed by the QuicKART
is:
A. 10
B. 20
C. 30
D. 50
2. While directing a chain of carts using the QuicKART, the operator should walk to the side of the
lead cart and hold it back to prevent the carts from separating and also enable them to be
stopped promptly.
True _____ False _____
3. The QuicKART should be used to push a chain of shopping carts into the cart room.
True _____ False _____
4. When approaching customers or employees with a chain of carts being pushed by the
QuicKART proceed toward them at your normal operating speed. True _____ False _____
5. During manual operation, the brake on the QuicKART is applied by releasing the throttle.
True _____ False _____
6. Before beginning to use the QuicKART, be sure to check (select only one)
A. The condition of the tires.
D. Flashing light is working.
B. Battery charge level is greater than 20%.
E. All of the above.
C. Brake for proper operation.
7. When manually operating the QuicKART, it’s acceptable to operate several carts attached to
the front of the machine. True _____ False ________
8. The QuicKART can be driven off curbs and on grass surfaces. True _____ False _____
9. It is OK to leave the QuicKART unattended without removing the key.
True_______ False_______
For each item below, identify its location on
the control panel on the left and write the
appropriate letter next to the item.
ITEM DESCRIPTION
Letter
10. Thumbwheel
11. Key Switch
12. Battery Level Meter
13. Status Light
14. Horn
15. Emergency Shut-Off
16. Programming Button
Number Correct:
_______
----------------------------------------------------------------------------------------------------------------------
STOP
To be completed by trainer.
PERFORMANCE TRAINING
Observe the associate perform the following tasks and indicate if he/she displayed acceptable operation.
For successful completion of training associate must display ability to properly perform all three operating
tasks:
Control Panel Use
Manual Operation of QuicKART
Cart Collection in Remote
Ok __ Unacceptable __
Ok __ Unacceptable __
Ok __ Unacceptable __
Trainer: ___________ Date:
If performance training was not successfully completed, do not allow the associate to operate machine on
their own until retrained and re-evaluated. If re-evaluated, make note below.
Note:
B
A
C
D
E
F
G
H