D&R Sirius Manual Download | Manualshive

Page: 40 / 52

background image

Software

Sirius digital Mixer from D&R Phone +31 294 418014, email:

[email protected]

Page 40

If you correctly enter the permissions of the users, snapshots can be saved/recalled
exclusively for a specific user. This means that users can only load and save snapshots in their
own directory. (See 7.4 User management).

7.5.2 EQ pre-sets

You have the possibility to make standard pre -sets of all EQ settings. In these pre -sets are
all settings stored and these can be loaded any time when needed.
When you have the ultimate EQ setting and you want to save this for later, simply hit the
right hand mouse switch when you are in the blue EQ window. Now you have three options
to choose from.

Load system EQ pre-set

This option opens the standard ‘EQ Pre -set’ directory. Here

you can select the EQ pre -set you want and by pressing the
OK label the pre -set will be loaded.

NOTE: This immediately affects the audio

.

Load user EQ pre-set

This option opens the users default directory. Now you can

choose a pre -set and by pressing the OK label the selected EQ
setting will be loaded.

NOTE: This immediately affects the audio

.

According to the permissions of the users it is possible to enter
other user directories and get some nice EQ settings from
another DJ.

Save user EQ pre-set

This options opens the users default directory. Here you can

save the current EQ setting when the need arises. You can
also create new directories and if the Authorizations are
sufficient you can save these settings into other users
directories.
To save a system pre -set you can go to the ‘EQ Pre -sets’
directory in the installation directory (normally C:\Program
Files\D&R Electronica B.V.\Sirius Digital). All pre -sets here
are visible for all users as system pre -sets.

7.5.3 Dynamics pre-sets

You have the possibility to create standard pre -sets for the dynamics section. These pre -
sets save all settings of the entire dynamics section. A recall can be made any time.
When you have a setting that needs filing simply click the right mouse button when being in
the blue dynamics curve window.
The following three options are visible.

Load system dynamics pre-set

This option opens the standard ‘Dynamics Pre -set’ directory.

Here you can select the Dynamics pre -set you want and
by pressing the OK label the pre -set will be loaded.

«
...
38
39
40
41
42
...
»

Summary of Contents for Sirius





















































Reviews:

No comments

Related manuals for Sirius

Brand: Hamilton Beach Pages: 24

Brand: Bailey Pages: 103

Design Mixer Advanced Electronic

Brand: Gastroback Pages: 72

Brand: Continental Electric Pages: 8

Brand: Omcan Pages: 16

Brand: Palmer Pages: 60

IDH2-3000 Series

Brand: TELELYNX Pages: 59

Powers Hydroguard 6

Brand: Watts Industries Pages: 2

Brand: G-Lab Pages: 20

Brand: Aion Electronics Pages: 10

Brand: Omcan Pages: 12

Hand/Stand Mixer

Brand: Hamilton Beach Pages: 20

Brand: Behringer Pages: 11

Brand: DAPAudio Pages: 20

Brand: Hamilton Beach Pages: 24

Brand: Yoo Digital Home Pages: 24

Brand: Philips Pages: 26

Brand: Mad Bean Pedals Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands