manualshive.com logo in svg

D&R Airlab, User Manual

Share
Download
D&R Airlab User Manual Download Page 69

Director Unit 

Airlab from D&R Phone +31 294 418014, email: 

[email protected]

 Page 

69 

 
 

18   DIRECTOR UNIT (discontinued) 

 
The Director is designed to be the answer for the need of the Station manager to manage the live 
broadcast and have control over in and outputs as well as communication to all essential in and outputs of 
the Airlab ON-AIR mixing console. 
 

 

 

 

Figure 29: Director front and rear view 

 
The director of the broadcast station can use the 'Director box'. By having this unit in front of him/her, 
he/she is capable of sending verbal instructions by Mic to the engineer, announcer, Guests and Studio or 
with one button to all outputs. There is also a Talkback output to and external output that can be used for 
local situations. 
Listening to Program outputs, SUB outputs, On-Air signals, CRM output, External inputs 1 and 2 is of 
course possible. 
Four Telco module incoming signals can be taken, talked to and muted if necessary. A standard 5-pole 
XLR connector is provided for the headset. A separate Mic input and headphone output is also available. 
 
 

 

Figure 30: Director 

 
Two large On-Air LEDS are indicating that the Airlab console is ON-Air. 
Level control for Headphone, Mic input and internal speaker are provided for. The back panel has 4 
adjustments for the Telco levels and all interfacing with the Airlab. 
An external power supply is part of the package 
 

Warning: The director option is only supported by Airlabs build after 01-01-2005. All Airlabs 
build before this date can be upgraded to support the Director. Please contact your dealer for 
further information. 
 

Summary of Contents for Airlab




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands