D&R Airlab User Manual Download | Manualshive

Page: 56 / 115

background image

How to program the Airlab

Airlab from D&R Phone +31 294 418014, email:

[email protected]

Page

56

ON AT START UP

To enter the next programming possibility you simply hit
the DOWN button again and you will see a new item. See
on the right what the LCD shows:
This option allows you to set one or more modules to be
default ON when powering up the console.

HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED’s located near the SELECT switch will light up on the modules that are turning to their
ON mode when the power comes up.

MIC CONNECTED AT LINE A

To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to hook up a Mic to Line A on one or
more modules. The COUGH/COMMUNICATION feature
automatically becomes available when the module is in
Line A mode.

Not available for Telco Module.

HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting.
This is a very quick way of programming this function. If you have already programmed several modules,
the moment you enter this menu again the LED’s located near the SELECT switch will light up on the
modules that are assigned for MIC-mode in LINE A.

MIC CONNECTED AT LINE B

To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to hook up a Mic to Line B on one or
more modules. The COUGH/COMMUNICATION feature
automatically becomes available when the module is in
Line B mode.

Not available for Telco Module.

HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED’s located near the SELECT switch will light up on the modules that are assigned for
MIC-mode in LINE B.

On at Power up?

Toggle by SELECT

MIC at Line A?

Toggle by SELECT

MIC at Line B?

Toggle by SELECT

«
...
54
55
56
57
58
...
»

Summary of Contents for Airlab




















































































































Reviews:

No comments

Related manuals for Airlab

Brand: Akura Pages: 10

Brand: Reliance electric Pages: 38

Brand: RONDELL Pages: 20

Brand: Martello Pages: 22

SmartServe MIC2000

Brand: Hamilton Beach Pages: 92

Brand: SpinCore Technologies Pages: 30

Brand: Homemaker Pages: 13

Brand: ALLEN & HEATH Pages: 12

Brand: ALLEN & HEATH Pages: 24

Brand: Bodum Pages: 97

Brand: Yamato Pages: 24

Brand: Corsynth Pages: 8

Xtreme Mix 233871

Brand: Graco Pages: 32

ProMix Easy Series

Brand: Graco Pages: 40

Brand: IK Multimedia Pages: 43

Brand: Behringer Pages: 4

Brand: Gemini Pages: 27

Brand: ATIKA Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands