D&R Airlab User Manual Download | Manualshive

Page: 55 / 115

background image

How to program the Airlab

Airlab from D&R Phone +31 294 418014, email:

[email protected]

Page

55

ON AIR-2 ACTIVE FOR LINE A

To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to set one or more modules to toggle
the ON-AIR-2 relay, when in Line A input mode.

HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED’s located near the SELECT switch will light up on the modules that are toggling the
ON-AIR 2 relay when line A is selected.

ON AIR-2 ACTIVE FOR LINE B

To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to set one or more modules to toggle
the ON-AIR-2 relay, when in Line B input mode.

HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. If you have already
programmed several modules, the moment you enter this menu again the LED’s located near the SELECT
switch will light up on the modules that are toggling the ON-AIR 2 relay when line B is selected.

ON AIR-2 ACTIVE FOR MIC

To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to set one or more modules to toggle
the ON-AIR-1 relay, when in Mic A input mode.

Not

available for Telco Module.

HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. If you have already
programmed several modules, the moment you enter this menu again the LED’s located near the SELECT
switch will light up on the modules that are toggling the ON-AIR 2 relay when MIC is selected.

LineA On Air-2?

Toggle by SELECT

LineB On Air-2?

Toggle by SELECT

Mic OnAir-2?

Toggle by SELECT

«
...
53
54
55
56
57
...
»

Summary of Contents for Airlab




















































































































Reviews:

No comments

Related manuals for Airlab

TRAKTOR KONTROL S4

Brand: Native Instruments Pages: 85

Brand: Yamaha Pages: 24

Brand: FAME Pages: 17

Brand: Vongon Pages: 17

Brand: HAI Pages: 1

Brand: Canford Pages: 9

Brand: ARESA Pages: 14

Brand: IK Multimedia Pages: 32

Brand: G-Lab Pages: 8

Brand: DigiTech Pages: 41

Brand: P.Lindberg Pages: 41

Brand: Cloud Pages: 20

Brand: Cuizimate Pages: 19

Brand: Scarlett Pages: 16

Brand: Adler Europe Pages: 52

Dyna Comp Bass Compressor

Brand: mxr Pages: 4

Brand: MCF Pages: 53

Brand: BST Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands