33
Fahrzeug-/Funktionsdecoder
ab Firmware-Version 3.12
33
Locomotive decoder PD10MU
from firmware version 3.12
For the wired variants connect the wires of the decoder according to the following scheme (see also graphic
below):
red wire .................with the right track wire
black wire ..............with the left track wire
orange wire ............with the motor wire, which was connected to the right track wire
gray wire ................with the motor wire, which was connected to the left track wire
white wire ..............with the front light in driving direction
yellow wire ............with the rear light in driving direction
*) Return conductor
M1 orange
M2 grey
G 1 red
G 2 black
LV white
L R yellow
Direction of travel 2 (backward)
Direction of travel 1 (forward)
*) Depending on the manufacturer, the return conductor can be connected to wheel 1 or 2 (red or black) and to the locomotive chassis
AUX1
AUX2
V S
GND
*) Depending on the manufacturer, the return conductor can be connected to wheel 1 or 2 (red or black) and to the
locomotive chassis