29
Fahrzeug-/Funktionsdecoder
ab Firmware-Version 3.12
29
Locomotive decoder PD10MU
from firmware version 3.12
1 Introduction
The vehicle decoder supports pure DCC operation and DC analog. It can be used for normal DC as well as for bell armature
motors.
The operation on alternating current supplied layouts with switching impulse is not allowed! The switching
impulse destroys the decoder!
The operation of inductive consumers (decouplers, relays, etc.) requires the connection of freewheeling diodes
(see supplement 3).
2 Safety instructions
This product is not suitable for children under 14 years.
It might be swallowed by children under 3 years!
An improper use involves a risk of injury due to sharp edges and points.
3 Warranty
The functioning of every decoder is fully tested before delivery. Should nevertheless a failure occur, please contact the
dealer where you purchased the decoder or directly the producer (Doehler & Haass). The warranty period is two years from
the data of purchase.
4 Support and help
In case you have any problems or questions please contact us by email:
Usually you will get an answer within a few days.