d&b audiotechnik Z5600.002 D40, Manual

Page: 7 / 22

2.1 Handling
The touring rack is equipped with two sliding doors allowing quick
and easy access to the front and rear panels of the devices.
1. Unlock the door lock mechanism.
2. Open the door.
3. Push the door into its park position.
2.2 Cooling and placement
NOTICE!
Risk of malfunction due to overheating!
Make sure both the front and rear doors are opened and
pushed into their park positions to provide sufficient cooling.
When using touring rack assemblies such as the d&b Z5600/
Z5601 D40 Touring rack assembly or any other touring rack
containing D40 amplifiers, make sure to provide sufficient space of
0.5 m (1.6 ft) at the front and rear of the touring rack to ensure
adequate cooling airflow.
CAUTION!
Risk of personal injury and/or damage to
material due to possible tipping over!
To avoid possible tipping over, do not move stacked touring racks.
D40 Touring rack assemblies as well as D40 and D20 Touring
racks can be stacked or positioned side by side.
When combining D40 Touring rack assemblies with Z3010 D12
Touring rack assemblies or any other rack assemblies that produce
an opposing airflow, observe the following restrictions:
▪ Do
not stack D12 Touring racks or any other rack assemblies
with opposing airflow on top of the D40 Touring Rack.
▪ D40/D12 Touring rack assemblies can be positioned side by
side.
2 Handling, cooling and placement
d&b Z5600.002 Manual 1.2 en 7