AL Flying frame / ALi Mounting frame
1.2 Intended use
The Z5455 AL Flying frame / Z5459 ALi Mounting frame must
only be used in conjunction with the d&b A-Series AL60/AL90 and
ALi60/ALi90 cabinets, as described in this manual.
A-Series vertical arrays and ArrayCalc
A vertical A-Series array can consist of up to four loudspeakers for
mobile and installed applications where the captive rigging
components and the normal mounting accessories are to be used.
For installed applications where more than four loudspeakers are
required in a vertical array, ArrayCalc allows the prediction of
arrays with up to six A-Series loudspeakers.
Note: Please note that arrays of more than 4 loudspeakers can
only be mounted using custom cabinets and custom-designed
mounting accessories and require the array to be driven with
ArrayProcessing. For these special applications, please consult
with your d&b sales partner.
1.2.1 General safety
▪ Installation and setup should only be carried out by qualified
and authorized personnel observing the valid national Rules for
the Prevention of Accidents (RPA).
▪ It is the responsibility of the person installing the assembly to
ensure that the suspension/fixing points are suitable for the
intended use.
▪ Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper
functioning and safety of the items, these must be withdrawn
from use immediately.
Chapter 4 "Care and maintenance"
1.2.2 Load safety information
NOTICE!
Both, the Z5455AL Flying frame and Z5459ALi Mounting frame
are designed to suspend a total of 4 x AL60/AL90 or ALi60/
ALi90 cabinets which corresponds to a total system weight of
100 kg (220 lb) – SWL.
d&b Z5455/Z5459 Rigging manual 1.1 en
5
