Rigging/Derigging
2. Attach the frame
1. Attach the frame on top of the cabinet until the Front links of
the cabinet fit into the slots at the front of the frame, as shown
in the graphic opposite.
2. Lift the back of the frame until the Front links are engaged.
3. Release the Locking pin of the Splay link slot of the frame.
4. Insert the cabinet's Splay link into the Splay link slot of the
frame.
5. Insert the Locking pin and ensure the pin is fully inserted and
properly locked.
6. Suspend the assembly according to the desired suspension
option.
3. Prepare the next cabinet
1. Extend both Front links.
2. At the rear, release the Locking pin of the Splay link.
3. Fold out the Splay link.
4. Set the link to the required length (Standard or Extended) and
turn the extension tube head counter clockwise by 90°.
4. Attach the next cabinet
1. Lift the assembly to a suitable working height.
2. With one person on each side, attach the prepared cabinet at
an angle of approx. 90° to the corresponding slots at the
front of the upper cabinet, as shown in the graphic opposite.
3. Slightly lower the cabinet until the Front links are engaged.
d&b Z5455/Z5459 Rigging manual 1.1 en
14
