d&b audiotechnik Z5396, Rigging Manual

Page: 4 / 10

1.1 Safety
1.1.1 Intended use
The Z5396 must only be used for ground stacked applications in
connection with d&b Y-Series Y8 and Y12 cabinets as described in
this manual.
The Base plate is not intended for flown use.
Note: Please note that the Base plate is not compatible/
applicable in connection with d&b Yi8 and Yi12 cabinets.
Limitations
The Base plate is designed to support a maximum of 3 x Y-TOP
cabinets when used directly on the ground.
A maximum of 6 x Y-TOP cabinets are allowed when using the
Base plate on top of an applicable d&b subwoofer, such as the
Y-SUB.
1.1.2 General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Please also refer to
Þ
Chapter 3 "Care and maintenance"
on page 8.
1.2 Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1 Z5396 d&b Y Base plate
[1]
Including:
1 Hand bolt M20 x 25 [2]
2 Locking pins 7 x 18 mm [3]
1 Locking pin 8 x 40 mm [4]
All items are undetachably attached to the plate using steel wire
ropes.
1 D2720.EN .01 Z5396 Rigging manual
1 Z5396 Y Base plate
d&b Z5396 Rigging manual 1.1 en 4