Mixed KSL array configuration
9.2.3 Attaching the TOP cabinets
The attachment of the TOP cabinets (Touring cart assemblies) is
similar to the assembly of a pure TOP column, as described in
Chapter 6 "Compression mode setup" on page 47 and/or
Chapter 7 "Tension mode setup" on page 54.
However, to connect the first TOP assembly to the adapter frame,
proceed as follows:
1. Lift the current assembly to a suitable working height.
2. Position the first TOP assembly and extend the Front links of
the uppermost cabinet.
3. Lower the array until the Front links of the top cabinet in the
cart fit into the slots at the front of the adapter frame.
4. Insert and lock the second Locking pins of the cabinet's Front
links on both sides.
5. On the rear rigging strand, release Locking pin
[2 ] and check
Locking pin
[1] is set to 0° (
Þ
).
6. Slightly lower the array and fold the Splay link into the rigging
strand.
7. Slightly lift the array until the Splay link has engaged into the
preset Locking pin
[1].
8. Insert and lock Locking pin
[2] (Safety pin) to secure the Splay
link in place.
d&b SL-Series Rigging manual 1.10 en
65
