background image

Manufacturer's declaration

6.1  EU conformity (CE symbol)
This declaration applies to:

d&b KSLi loudspeaker cabinets
(with integrated rigging components.)
▪ Z0790 KSLi8

▪ Z0791 KSLi12

▪ Z0795 KSLi-SUB
d&b KSLi rigging components
(including all additional components.)
▪ Z5743 KSLi TOP Mounting frame

▪ Z5744 KSLi SUB Mounting frame

▪ Z5745 KSLi SUB Mounting adapter
manufactured by d&b audiotechnik GmbH & Co. KG.
All product variants are included, provided they correspond to the

original technical version and have not been subject to any later

design or electromechanical modifications.
We herewith declare that said products are in conformity with the

provisions of the respective EC directives including all applicable

amendments.
A detailed declaration is available on request and can be ordered

from d&b or downloaded from the d&b website at

www.dbaudio.com

.

6.2  Disposal
When out of use the rigging components must be disposed of in

accordance with the national environmental regulations.
Ensure that damaged rigging components are disposed of in a

way that they cannot be used again.

6  Manufacturer's declaration

 

d&b KSLi Rigging manual 1.1 en

30

Summary of Contents for KSLi Series
































Reviews: