d&b audiotechnik KSLi Series, Rigging Manual

Page: 18 / 31

KSLi arrays and assembly procedures
3. Attach the Mounting frame to the first cabinet
To attach the frame to the first cabinet, proceed as follows:
Tool required:
▪ Allen hex key #4 mm
1. On the front tie bar of the frame, release and pull out the
Locking pins (type D) on both sides.
2. Lower the frame onto the cabinet until the Front links of the
cabinet fit into the slots at the front of the frame and the Rear
link of the frame fits into the rear rigging strand of the cabinet.
3. Insert and lock the Locking pins (type D) of the frame on both
sides.
4. At the rear, align the inner hole of the Rear link with the [0°]
hole of the rear rigging strand of the cabinet.
5. Insert the first Locking pin into the
[0°] hole.
6. Insert the second Locking pin (Safety pin
[S]) into the hole
below ( [2°] hole).
7. Remove the T-handles.
4. Add further cabinets
1. Prepare the Front and Splay links of the next cabinet as
described in
Þ
Chapter 2.5.1 "Front link mechanism"
on page 13 and
Þ
Chapter 2.5.2 "Splay/Rear link
mechanism" on page 14.
2. Attach the T-handles.
3. Lift the assembly to a suitable working height.
4. Release and pull out the fixing bolts at the bottom of the front
rigging strands of the first/upper cabinet.
5. With the front grill facing upwards, attach the prepared next
cabinet to the corresponding slots at the front of the upper
cabinet.
6. Insert and handtighten the fixing bolts of the upper cabinet's
front rigging strands on both sides.
d&b KSLi Rigging manual 1.1 en 18