Remote off
Remote
Remote
Back
Mode
off
dbCAN Id 0. 01
Fig. 10: Remote menu
All functions of the D6 can be remotely interrogated via the dbCAN
(CAN-Bus).
Mode
Selecting "Mode" the following modes for remote control are available:
off:
no remote control.
Sub net 0 to 7
Device Id 01 to 63
dbCAN Id
7
. 01
dbCAN Id
0
. 01
dbCAN Id 7.
63
dbCAN Id 7.
01
dbCAN:
remote control via dbCAN (CAN-Bus).
The on/off status is indicated by the "dbCAN Id"
in the main screen (e.g.
7.63
).
dbCAN Id
Setting the "dbCAN identifiers [n].[nn]". The first digit represents the
CAN subnet. Eight subnets can be defined (values 0 to 7). Using the
two-digit device ID for each subnet 63 devices can be defined (values
01 to 63).
Note:
A detailed description of remote control via dbCAN (CAN-Bus) is given
in the technical information TI 312 (d&b code D5312.E.). You can either
download this TI directly from the d&b website at
www.dbaudio.com
or
use the online order form to request a printed version.
Lock Press 2s
Lock
Selecting "Lock" and pressing the encoder enters the submenu.
Lock
Back
Lock now
Mode Press 2s
Fig. 11: Lock menu
Lock now
Pressing the encoder switches the device into "Lock" mode according to
the mode selected below and exits the submenu "Lock".
Mode
Selecting "Mode" and pushing the encoder toggles between two
options to protect the device against unintentional operation.
Press 2s
prevents accidental operation by locking the front
panel controls.
Password
password protection that prevents operation by
unauthorized persons.
Show Main Screen
Show
Selecting "Show" and pressing the encoder allows two different screens
to be displayed when the device is locked.
Main Screen
Switch to the "Main screen".
Levels Screen
Switch to the "Levels screen".
Password
Selecting "Password" and pressing the encoder enters the submenu
"Edit Password".
D6 Software manual
(Firmware V1.x.x)
(1.1EN)
Page 19 of 32
