d&b audiotechnik 10D, Manual, Page: 24 / 92

5. To change/enter a device or Channel name as
well as IP settings, click the relevant screen
item.
↳ An input mask will be displayed which
allows you to enter the desired data by
clicking the respective characters and/or
numbers.
6. Confirm your entry by clicking the
corresponding «OK» button.
Keyboard entries
In addition, entries such as Device name or Channel name as well
as IP addresses can also be entered using the keyboard.
However, depending on the behavior of the browser or its settings,
some characters may not be accepted or may change the focus.
Password dialog
Once the device is locked with a password, the Web Remote
interface is also locked and can no longer be accessed.
A corresponding dialog will pop up to allow you to unlock the
device.
Event log tab
The «Event log» stores a maximum of 10000 records. Once the
maximum number of records is reached, the system starts deleting
the first ones
Þ
Ring buffer.
The number of records displayed depends on the size of the
browser window.
Located on the right-hand side of the record list
are various Navigation buttons allowing you
to scroll through the list using the
«Page Up/Down» or «Line Up/Down» buttons
or by directly jumping to the «Latest» record.
In addition, the editable «Record» field allows
you to enter a dedicated record number. The
corresponding record will be displayed at the
very bottom of the record list.
Storage option ( )
In addition, a storage option is provided which allows you to store
the Event log data locally. This is mainly intended for service
and/or troubleshooting purposes.
To save the Event log data locally, proceed as follows:
d&b 10D/30D Manual 1.10 en 24