background image

7

6

Manual

Technical certificate

RULES OF OPERATION 

The greenhouse should be serviced in the winter period. The greenhouse has 

durability under the action of snow loads way more than is required for greenhouses, 
but less for some snow areas in comparison with the general construction standards. 
According to SNiP 2.10.04-85 «Greenhouses and seedbeds» «weight of snow blanket 
on  1  m2  of  horizontal  surface  of  the  ground  in  design  of  static  greenhouses…» 
should be taken from 10 to 40 kg/m2 depending on a snow region. This is much 
less than the general construction standards for snow load, because it is assumed 
that on the current greenhouses a snowcap is not preserved until the next snowfall. 
According to the results of strength tests the limits of durability of the greenhouse 
frame are revealed: destroying snow load is 240 kg/m2, permissible load (with safety 
coefficient  1.4)  –  180  kg/m2.  The  permissible  load  approximately  corresponds  to 
the thickness of fresh snow 0.9 m and settled snow 0.45 m.

If the greenhouse is not heated in winter, or it is supposed to use the greenhouse 

as  an  unheated  housing,  awning,  warehouse,  etc.,  it  is  necessary  to  control  the 
snowcap  (to  shift  the  snow  down  with  a  wooden  or  plastic  scraper,  installed  on  a 
pole).  For these variants of operation it is possible to supply reinforced frames with 
a  reduced  interval  between  the  power  arcs  under  the  snow  load  specified  by  the 
customer.

Do not allow damage to the frame, and if it happened, then hold timely repairs.

Extra package insert

Ridge shape

1

2,10

Top draw band

1

8,42

Bottom draw band

2

0,60

Top arc base sheet

2

1,67

Bottom arc base sheet

2

2,91

Outermost base sheet for a runner

2

2,04

Tingle

20

0,09

Main shape

2

2,10

Washer 32х6

12

Bolt М6х14

34

Bolt М6х20

12

Bolt М6х60

2

Nut М6

48

Washer 6

50

Double-size scotch tape

1

5 м

Тable    4

1. The manufacturer bears responsibility for the greenhouse frame complete 

setup.

 2. The manufacturer bears responsibility for the greenhouse
  assemblability in accordance with the manual.
3. The manufacturer bears responsibility for the greenhouse durability under 

specified magnitude of atmospheric actions.

4. Claim presentation period is 12 months from the date of purchase.

 WARRANTY LIABILITIES 

Warranty conditions

Warranty liabilities do not apply to cases of:
1. Greenhouse installation with violation of requirements of the manual.
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Floods, hurricanes and other natural disasters.

It is not allowed to install the greenhouse without fastening on the ground because 

of the large sail area of the greenhouse and the possibility of floating away the 

unfastened greenhouse.

Cleaning and washing of polycarbonate sheets.

1. Rinse sheet with warm water.
2. To remove dirt, wash it with mild soap solution or domestic detergent using a soft 
cloth or sponge.
3. To remove water, rinse the sheet with cold water and wipe it with a soft cloth.

Never  use  abrasives  or  high-alkali  detergents  for  cleaning 
polycarbonate  sheets.  Dry  wiping  damages  covering  layer  of 
the  covering  and  shortens  its  service  life.  Never  rub  surface  of 
polycarbonate sheets with a brush, metalized fabric or other abrasive 
materials.

       Do not use sulphur cartridges for disinfecting greenhouse 
                       against fungal and bacterial agents in order to prevent 
                       corrosion (darkening) of the frame.

The manufacturer reserves the right for greenhouse engineering design changes.

Summary of Contents for TITAN Peak 240 5,0

















Reviews: