Dancover TITAN Arch 280, Manual

Page: 6 / 30

Do not mix polycarbonate sides! Fix the set side on the outside, which has a protective layer against
UV rays. The protective layer against UV rays is coated with a tape with notes, the other side
(covered on the inside) is coated with a transparent tape. If necessary, it is recommended to cut sheets
with electric circular saw
, hand saw with fine teeth or sharp knife. Prior to installation, be sure to
remove all tapes! WHEN CUTTING BE SURE TO WEAR GLOVES!
-1-; -2-;
-3-; -4-; Side parts
-5-
Doors (top part)
-6- Doors (the bottom
part)
-7- Window
-8- The bottom of the
window
-9- Top polycarbonate of
the window of the doors
If you have received large sheets 2,10x6,00 m and additionally 1,05x2,00 m, in such case
there is no need to cut large sheets according the provided scheme. Large sheets of
2,10x6,00 m are used for roof and small sheets of 1,05x2,00 m are used for ends, doors and
windows. Follow the dimensions provided in the table of polycarbonate dimensions.
Polycarbonate Sheets