Dancover ARROW 2,6, Manual

Page: 22 / 29

Manual
21
Cutting out and fastening cover surface
13.
Cellular polycarbonate shall be installed strictly defi ned side out (towards
the sun), which has a protective layer. The protective layer is usually at the side
with the inscriptions on the transport fi lm. The fi lm on the other side of sheet is
transparent. After marking the sheet, but prior to its cutting, make a mark on
the protected side of the sheet for each piece: after removal of the transport
fi lm sheet sides are not visually different. The transport fi lm is stripped from
both sides immediately before fi xing the cladding on the frame.
Sections of polycarbonate with
open honeycombs should be
covered by adhesive tape.
6000
2000
1000
1054