Setting the AUTO-ON & AUTO-OFF TIMER
Before setting the
AUTO-ON & AUTO-OFF Timer,
the
time of day clock
must be set/operational. You
must also select the appropriate operating
MODE
.
After the appropriate settings have been made,
turn
off the unit.
1) Press the
TIMER-ON
key pad to initiate the
AUTO-ON
time sequence.
(Fig. 32)
. The display
window will indicate
TIMER-ON
and the word
ON
will flash for 5 seconds. Press the
or key pad to select the desired
AUTO-ON
start time.
(Fig. 32a).
key pad will decrease the
AUTO-TIMED
setting in 10 minute increments.
keypad will increase the
AUTO-TIMED
setting in 10 minute increments.
When the desired time is established, (the time
will flash in the display window) press the
CLOCK
key pad to register the
AUTO TIMER-
ON
program. The word
ON
will stop flashing and
remain “on”
(TIMER ON)
indicating the program
is set. The time of day clock setting will
immediately revert back in the display window.
The unit must remain “OFF” while programming
the AUTO-OFF program.
2) Press the
AUTO-OFF
key pad to initiate the
AUTO-OFF
time sequence.
(Fig. 33)
. The
display window will indicate
TIMER-OFF
and the
word
OFF
will flash for 5 seconds. Press the
or key pad to select the desired
AUTO-
OFF
time.
(Fig. 32a).
key pad will decrease the
AUTO-TIMED
setting in 10 minute increments.
keypad will increase the
AUTO-TIMED
setting in 10 minute increments.
When the desired time is established, (the time
will flash in the display window) press the
CLOCK
key pad to register the
AUTO TIMER-
OFF
program. The word
OFF
will stop flashing
and remain “on”
(TIMER OFF)
indicating the
program is set. The time of day clock setting will
immediately revert back in the display window.
When the
AUTO-ON
&
AUTO-OFF
times are set,
within the same program sequence, the display
window shows
TIMER ON OFF
identifying that both
ON
and
OFF
times are now programmed
(Repeatable daily until until such time the program is
canceled and/or changed).
IMPORTANT: The desired AUTO-ON & AUTO-
OFF time must be registered within a 5 second
period (after pressing the TIMER-ON/OFF key
pads) otherwise the selected time will not
register and the system will automatically revert
back to the regular “time of day” clock setting
The unit will start automatically when the specified
AUTO-ON
time is achieved on the time of day clock
and will stop automatically when the specified
AUTO-OFF
time is achieved on the time of day
clock. To cancel or override the
AUTO-TIMED
program, simply turn the unit on or off prior to the
scheduled
AUTO-ON/OFF
time. You can verify the
AUTO-ON/OFF
time selection anytime by pressing
each respective
TIMER-ON/TIMER-OFF
key pad
and the selected time will temporarily appear
replacing the time of day clock for approximately
5 seconds.
18
