Setting the AUTO-OFF TIMER
Before setting the
AUTO-OFF
timer, the
time of
day clock
must be set/operational.
1) To set the
AUTO-OFF
timer, the unit must be
turned on (I/O switch) and operational.
2) Press the
TIMER-OFF
key pad to initiate the
AUTO-OFF
time sequence.
Fig. 33.
The display
window will indicate
TIMER-OFF
and the word
OFF
will flash for 5 seconds. Press the or
key pad to select the desired
AUTO-OFF
time.
Fig. 33a.
key pad will decrease the
AUTO-TIMED
setting in 10 minute increments.
keypad will increase the
AUTO-TIMED
setting in 10 minute increments.
When the desired time is established, (the time
will flash in the display window) press the
CLOCK
key pad to register the
AUTO TIMER-
OFF
program. The word
OFF
will stop flashing
and remain “on”
(TIMER OFF)
indicating the
program is set. The time of day clock setting will
immediately revert back in the display window.
You can varify the
AUTO-OFF
time selection
anytime by pressing the
TIMER-OFF
key pad. The
time you selected will appear (flash) temporarily
(replacing the time of day) for approximately 5
seconds.
IMPORTANT: The desired AUTO-OFF time must
be registered within a 5 second period (after
pressing the TIMER-OFF key pad) otherwise the
selected time will not register and the system
will automatically revert back to the regular
“time of day” clock setting. If this occurs, you
must repeat step 2 again.
The unit will stop automatically when the specified
AUTO-OFF
time is achieved on the time of day
clock. To cancel or override the
AUTO-TIMED
program, simply turn off the unit manually, prior to
the scheduled
AUTO-OFF
time.
Water Full
Cool/Heat/Dry
I/O
MODE
ON
OFF
SWING
TIMER
CLOCK
FAN
12:00
TIMER
OFF
TEMP./CLOCK
ADJ.
Fig. 33
Water Full
Cool/Heat/Dry
I/O
MODE
ON
OFF
SWING
TIMER
CLOCK
FAN
12:00
TIMER
OFF
TEMP./CLOCK
ADJ.
Fig. 33a
17
