Part Identification
1.
Glass Door
2.
Control Panel
3.
LCD Display
4.
Interior Light
5.
Wine Racks
6.
Adjustable Feet
Location Requirements
•
Select a location with a strong, level floor.
•
Allow 5 inches of space between the back of the
appliance and any adjacent wall.
•
Avoid direct sunlight and heat. Direct sunlight may
affect the acrylic coating, heat sources nearby will
cause higher electricity consumption.
• Do not
use this appliance outdoors:
This
appliance is intended for
household use only. Do
not attempt to operate or store this appliance
outdoors.
• Do not
build this appliance into an enclosure: This
appliance is designed for a free-standing
application only and is not intended to be “built-in”.
Before Using your Wine Cooler
•
Remove the exterior and interior packing.
•
Check to be sure the following parts are included:
• 1 Slide-out shelf.
•
Before connecting the appliance to the power
source, let it stand upright for approximately 2
hours. This will reduce the possibility of a
malfunction in the cooling system from handling
during transportation.
•
Clean the interior surface with lukewarm water
using a soft cloth.
•
Place your appliance on a floor that is strong
enough to support the appliance when it is fully
loaded. To level your appliance, adjust the front
legs at the bottom of the appliance.
I N S T A L L A T I O N
3
1
2
3
6
4
5
