Installation of CO
2
Cylinder Support
•
Install the metal support provided onto the 4 studs located on the exterior back wall. Align the holes in the support with
the studs and push down fi rmly (see Fig. 1).
Installation of CO
2
Cylinder
• The
CO
2
Cylinder provided is empty. The cylinder must be fi lled with CO
2
prior to use.
•
Install your fully charged cylinder into the support stand. Note: It is important to remove packaging (bubble wrap) from
the cylinder prior to installation.
Installation Instructions
Installation of CO
2
Regulator
•
Attach the CO
2
regulator to the cylinder by turning the regulator nut onto the cylinder valve, making sure the washer is
securely inserted into the connecting nut. Tighten snug using an
adjustable wrench
(not supplied) and assure there
are no leaks - no hissing sounds (see Fig. 2).
Installation of CO
2
Air Line Outside Cabinet
•
Remove plug located at the exterior back (top left hand corner).
•
Save it for later use if you decide to convert unit to a refrigerator.
•
Feed the gas line through the cabinet and out through the uncovered hole (Fig. 4).
Installation of CO
2
Air Line Hose to Regulator
•
Attach the open end of the hose to the hose barb connection on the regulator.
•
Secure hose by using one clamp provided. Use pliers/screwdriver to tighten clamp to prevent leaks (see Fig. 3).
Installation of the Beer Tower
•
Remove the top plug by twisting and pulling out, saving it for later use if you decide to convert the unit to an all refrig-
erator unit.
•
Unravel the beer line (clear hose) from the tower and insert the beer line and wing nut through the uncovered hole on
top.
•
Lock the beer tower assembly to the top and make sure to position the beer faucet so it is aligned with the cabinet
from (6 o’clock position).
•
The rubber gasket, can be used to make the connection between the tower and the cooler tighter if needed. If the
beer tower will not turn to lock in place, try removing the rubber gasket. (The rubber gasket may not be required in all
unit confi gurations).
8
Fig. 1
Fig. 3
Fig. 2
