Plastic Faucet Lever
•
Attach the black plastic lever (pull handle) to the top of the faucet by tightening it by hand going clockwise until the
end, holding in the silver nut underneath so it does not turn. If there is still a small drip from the faucet, you may have
overtightend the silver nut and may need to unscrew silver snug going counter-clockwise (as shown one turn).
Installation Instructions
Dispensing of Beer
•
Keep beer keg refrigerated at all times.
•
Never allow beer lines to dry out.
•
Use clean beer glassware before pouring.
•
Hold glass at a 45° angle, when it is 2/3 full, start to straighten glass as the glass fi lls.
•
Always make sure the faucet handle is pushed all the way back.
Note:
Keg sizes that can be used in your keg cooler:
Note:
The refrigerator compartment can accommodate 2 x 1/6 barrel kegs, as well as 2 x 1/8 barrel kegs.
The refrigera-
tor compartment cannot accommodate the “Coors” style beveled barrel keg.
Note:
Our keg cooler accepts domestic kegs up to 16-1/8” in diameter and up to 23-3/8” in height. Check with your distrib-
utor to make sure keg is correct size.
Note:
It is important to allow the keg to sit upright, undisturbed, for 2 hours before tapping.
11
1/2 barrel - 59 Liters - 15.5 gals - 1984 oz. - 164/12-oz. Glass
1/4 barrel - 30 Liters - 7.8 gals. - 992 oz. - 82/12-oz. Glass
1/6 barrel - 20 Liters - 5.2 gals. - 661 oz. - 55/ 12-oz. Glass
1/8 barrel - 15 Liters - 4.0 gals. - 496 oz. - 41/ 12-oz. Glass
