KEY PAD FEATURES
LED DISPLAY:
Displays the following information
independently;Set Temperature, Ambient Room Temperature
and Auto Timer On/Off settings.
POWER:
Turns unit On/Off.
MODE:
Allows you to scroll through and select the
desired operating mode; Cool , Dry , Fan Only and *Auto
.The selected mode will be denoted by the adjacent indicator
light.*‘Auto’is a pre-set factory program that automatically
defines the mode (Cool or Dry) and fan speed based on the set
temperature.
FAN SPEED:
Select from four different fan settings;Low
, Medium , High and Auto during Cool and Fan Only mode.
Please note: During ‘Dry’ mode the fan speed is automatically
defined .
ENERGY SAVER:
Automatically cycles the fan on and
off while the compressor is not in use.
TEMP / TIMER CONTROL:
Used to increase or
decrease the Temperature setting in 1°C increments, and
Auto-Timer On/Off settings in 30min./1hr. increments.
Note:
This appliance displays temperature in
°C ONLY.
CHECK FILTER:
The adjacent indicator light will
illuminate as a reminder to clean the air conditioner filter (see
page 9) Once the filter has been cleaned and replaced,
depress the Check Filter button in order to resume operation.
SLEEP MODE:
When activated, the current set
temperature is gradually increased over a one (1) hour period
then maintained for seven (7) hours. Once the program is
complete, the air conditioner will resume to its previous set
temperature (before sleep mode was activated). This feature is
meant to be used during the night time hours to prevent the
room from getting too cold (while you sleep) and results in
less compressor running time and reduced energy
consumption. Sleep mode may be cancelled by depressing the
Sleep Mode button while the program is running.
AUTO-TIMER:
Used to initiate the Auto On/ Auto Off
timer.
While the Air Conditioner is off (Auto-On):
1)
Press the Auto-Timer button once and the adjacent Auto-On
indicator light will
illuminate.
2)
Use the Temp/Timer control cursors to select adelayed
Ontime of up to 24 hours.
Temp/Timer
Control
Check
Filter
Mode
Selector
Energy
Saver
LED
DISPLAY
Auto
Timer
Sleep
Mode
Fan
Speed
Power
Button
3)
Select the appropriate mode under which
you want the unit to operate (Auto-Cool-Dry-
Fan Only)
4)
Select the fan speed setting.
5)
The time you selected will appear in the
LED display.
While the Air Conditioner is on (Auto-Off):
1)
Press the Auto-Timer button twice and the
adjacent Auto-Off indicator light will
illuminate.
2)
Use the Temp/Timer control cursors to select
a delayed Off time of up to 24 hours.
3)
The time you selected will appear in the
LED displayThe Auto On and Auto Off timer
can operate during the same program by
defining the Auto-Off parameters immediately
after the Auto On parameters. The Auto-Timer
may be cancelled at any time by turning the
unit On/Off.
OPERATING INSTRUCTIONS
6
