3
SAFETY
!
Only qualified personnel should install or service this equipment.
!
Before performing any work on the unit, allow at least five minutes
for the capacitors to discharge fully.
!
Voltage is present on unprotected pins when unit is operational.
!
Motors powered by this drive may develop extremely high torque.
Be sure to disconnect power to this drive before performing any
mechanical work.
This unit is designed for 24 to 40 VDC input only (see
Electrical Specifications).
WARRANTY AND LIMITATION OF LIABILITY
Danaher Motion (the "Company") warrants to the first end user purchaser (the
"purchaser") of equipment manufactured by the Company that such equipment, if
new, unused and in original unopened cartons at the time of purchase, are free
from defects in material and workmanship under normal use and service for a
period of one year from date of shipment from the Company's factory or a
warehouse of the Company in the event that the equipment is purchased from
the Company or for a period of one year from the date of shipment from the
business establishment of an authorized distributor of the Company in the event
that the equipment is purchased from an authorized distributor.
THE COMPANY'S OBLIGATION UNDER THIS WARRANTY SHALL BE
STRICTLY AND EXCLUSIVELY LIMITED TO REPAIRING OR REPLACING,
AT THE FACTORY OR A SERVICE CENTER OF THE COMPANY, ANY SUCH
EQUIPMENT OR PARTS THEREOF WHICH AN AUTHORIZED
REPRESENTATIVE OF THE COMPANY FINDS TO BE DEFECTIVE IN
MATERIAL OR WORKMANSHIP UNDER NORMAL USE AND SERVICE
WITHIN SUCH PERIOD OF ONE YEAR. THE COMPANY RESERVES THE
RIGHT TO SATISFY SUCH OBLIGATION IN FULL BY REFUNDING THE
FULL PURCHASE PRICE OF ANY SUCH DEFECTIVE EQUIPMENT
. This
warranty does not apply to any equipment which has been tampered with or
altered in any way, which has been improperly installed or which has been
subject to misuse, neglect or accident.
