DANA TM4 SUMO MD MV, Troubleshooting Manual

Page: 179 / 182

179
Appendix
Remove the MCU from the vehicle
Safety precaution
Safety instructions related to the charger removal:
Follow the vehicle
integrator’s instructions to unmount
the unit. You may be asked to keep the hardware for
the reinstallation of the replacement charger.
Chargers are not supplied with mounting hardware.
Care must be taken when handling the unit.
•
This product must be handled by qualified
and authorized personnel in accordance with
applicable vehicle standards and industry
practices. Always use appropriate insulation
and protection before manipulating the
product
even when the product is
disconnected from a high-voltage source.
Operations
1. Remove the mechanical fixation from the
charger.
2. Remove the charger from the vehicle with
precaution.
Install the new unit
Safety precaution
Mishandling of this product may damage the product
and/or cause injury or death.
•
Do not attempt to open the charger for
repairs; in case of damaged casing or
suspected product malfunction, contact TM4.
•
If using straps to lift the charger, ensure they
do not touch or put pressure on the
connectors.
When manipulating this product:
•
Do not modify any part.
•
Do not apply any external loads.
Operations
1. Make sure to acknowledge all the safety
precaution needed to install the unit before
handle it.
2. Refer to the integrator installation manual to
install
the unit according the integrator
configuration.
WARNING
WARNING