DANA TM4 SUMO MD MV, Troubleshooting Manual

Page: 163 / 182

163
Appendix
SysFile
ID Diagnostic
Type Description Troubleshooting
Tree
0x4003 Warning ComClient 0x03 - VmuCommandSafety
CommandMode is invalid
34
0x4004 Warning ComClient 0x04 - VmuCommand2
TorqueCommand is out of range
34
0x4005 Warning ComClient 0x05 - VmuCommand2
SpeedCommand is out of range
34
0x4006 Warning ComClient 0x06 - VmuCommand2 CommandMode
is invalid
34
0x4007 Warning ComClient 0x07 - VmuCommand2
OperationalMode is invalid
34
0x4008 Warning ComClient 0x08 - VmuCommand1
OperationRequest is invalid
34
0x4009 Warning ComClient 0x09 - VmuCommand1
MinBatteryVoltage voltage is out of range
34
0x400A Warning ComClient 0x0A - VmuCommand1
MaxBatteryVoltage voltage is out of range
34
0x400B Warning ComClient 0x0B - VmuCommand1
MaxDischargeCurrent is out of range
34
0x400C Warning ComClient 0x0C - VmuCommand1
MaxChargeCurrent is out of range
34
0x400D Warning ComClient 0x0D - Safety check, delta too high
between CommandMode
34
0x400E Warning ComClient 0x0E - Safety check, delta too high
between SpeedCommand
34
0x400F Warning ComClient 0x0F - Safety check, delta too high
between TorqueCommand
34
0x4010 Warning ComClient 0x10 - The library cannot decode the
received data
34
0x4011 Warning ComClient 0x11 - A message received had the
wrong DLC
34
0x4013 Warning ComClient 0x13 - VmuCommand1 timeout
35
0x4014 Warning ComClient 0x14 - VmuCommand2 timeout
35
0x4015 Warning ComClient 0x15 - VmuCommandSafety timeout
35
0x4209 Warning NvdBlackboxSection #10
02
0x4703 Error GDMGR 0x03 - CAN communication error
35
0x4801 Error (Position sensor error: verify previous warnings)
05
0x4B00 Warning CoilTempSensorMgr 0x00 - Motor temperature
sensor A1 is invalid
05
0x4B01 Warning CoilTempSensorMgr 0x01 - Motor temperature
sensor B1 is invalid
05
0x4B02 Warning CoilTempSensorMgr 0x02 - Motor temperature
sensor C1 is invalid
05
0x4B03 Warning CoilTempSensorMgr 0x03 - None of the motor
temperature sensors is valid
05