Dametric AB
GIR-DM1
GMS Industrial Router
GIR-DM1 EN.docx
Sept. 14, 2015 / BL
Page 6 of 7
4.2 Terminal connections on the top
Figure 3: Connections on the top of the device
Terminal
Designation
Description
1
10 ... 48 VDC
Power supply 10 V – 48 V DC
2
GND
Ground
3
Reset
Reset input
Table 8: Description of the connections on the top of the device
The reset input must be connected to ground (GND) to reset the device. The functionality is identical to the
reset key
5 Mounting
Position the device at the DIN rail. There are two snap-in hooks at
the upper and lower edge of the DIN rail groove. Hook the upper
one into place behind the upper edge of the DIN rail.
Lift the device perpendicular to the DIN rail until the two lower,
flexible snap-in hooks engage in the DIN rail.
