16
Ensure Seal is deflated and Side Panels extended
sufficiently so T-Clips are fully visible on the top of
the barrier before removing the seal
2.0
1.0
3.0
4.0
0
Place the barrier flat on a smooth, even surface to safely remove the used seal
1.
Lift the Seal at both ends to release the T-Clip on the top of each Side Panel
2.
Open the Seal Replacement Panel
3.
Decompress the Quick Release Fitting to fully release the Seal
4.
Remove seal completely from beneath the barrier, segregate materials and recycle
at a registered recycling facility
STEP 1: REMOVE USED SEAL
2.0
1.0
3.0
4.0
0
A
A
B
1
2
4
3
2
1
3
4
0
780mm –1100mm
bar
2
1
3
4
0
bar
780mm –1100mm
2.0
1.0
3.0
4.0
0
2.0
1.0
3.0
4.0
0
CAUTION/
IMPORTANT
2.0
1.0
3.0
4.0
0
STEP 2: FITTING REPLACEMENT SEAL
Do not remove the replacement seal from
packaging until immediately before replacement
Place the barrier flat on a smooth, even surface to safely replace the seal
1.
Insert the Seal Valve at the centre of the seal into the opening on the underside of
the barrier and carefully secure to the inflation mechanism by compressing the
Quick Release Fitting within the Seal Replacement Panel.
2.
From the centre, run the Seal along the recess on the underside and along the
edge of the side panels, do not twist the seal. Click both ends into place
3.
The T-Clips must be flush at the top of each Side Panel
4.
Replace Seal Replacement Panel cover. The barrier is now ready for storage.
17
B
A
A
3
1
2
3
SECTION F: Replacing the seal
SECTION F: Replacing the seal
CONTINUE TO SECTION G, STORING THE BARRIER
CAUTION/
IMPORTANT
A
B
A
B
