background image

SECTION C: Installing the barrier(s)

1A.1   Clear any dirt or debris from the doorstep 

and reveals. For an enhanced seal, double 
over filler to create a thick strip.

1A.4   Position the barrier vertically, between 

the reveals in the centre of the doorway 
(Ratchet Handle facing inwards). Hold the 
Barrier firmly in place at the Lifting Handles 
until secure within the reveals

STEP 1A: POSITION A SINGLE BARRIER

Do’s 

•  Follow these instructions carefully, see

demonstration videos available online
www.dameasyfloodbarriers.com

•  Wear gloves to prevent injury from

pinch points and contamination from
flood water

•  Lift only from the Lifting Handles

indicated to avoid damaging the barrier

•  When the barrier is installed and

there is a risk of flooding, monitor air
pressure regularily

•  To avoid damaging the inflatable seal,

always place the barrier on an even
surface

Don’ts 

•  DO NOT use any tools while installing,

removing, maintaining or cleaning the barrier.
Use of tools may damage the seal and will
invalidate the warranty

•  DO NOT install the barrier in a door frame,

a watertight seal cannot be guaranteed 
between the reveal and the frame

 DO NOT lift by the pump handle

•  Never inflate the seal when the barrier is not

secure in a doorway

•  DO NOT deflate the seal or retract the side

panels when the barrier is installed in a
doorway until water receeds

•  DO NOT allow any detergents or any chemicals

to come into contact with the barrier

SECTION B: Do’s and Don’ts – Safety

PLEASE READ CAREFULLY

Basic safety precautions

2.0

1.0

3.0

4.0

0

2.0

1.0

3.0

4.0

0

7

6

•  This barrier is designed for use within

external reveals of suitable doorways.
See 

Section A Flood Barrier Specifications 

for description of suitable doorways

•  For installing, removing, maintaining and

storing, use as detailed in this instruction
manual, retain for future use (available to
download www.dameasyfloodbarriers.com)

•  The barrier weighs 19.7kg/43.4lb, take care

when lifting – 2 people may be needed to
lift the barrier safely

•  Complete a full trial installation of the

barrier in the doorway that requires flood 
protection, prior to a risk of flooding.

•  Flood water may be contaminated, always

use gloves and eye protection and carefully
clean and dry the barrier thoroughly if it has
been in contact with flood water

•  Clear dirt and debris from the reveals and

repair any cracks or damage to ensure a
watertight seal

•  Flood water can enter a property from other

access points, see Section I Accessories for
additional flood protection products and seek
professional advice for suitable protection for
your property

•  Store the barrier as directed, in the original

packaging away from direct sunlight and
extremes of temperature

While the Barrier is ‘in use’ 
(Installing, Removing, Maintaining & Storing)

Wear gloves while installing, removing and maintaining the barrier to avoid injury
Always hold the Barrier firmly at the lifting handles when not secure in a doorway

CAUTION/
IMPORTANT

1A.3   Wearing gloves, remove the barrier 

from the reusable packaging. Help from 
another person may be needed to lift 
safely (lift only at the Lifting Handles 
marked)

FOR SINGLE BARRIER INSTALLATION 
FOLLOW STEPS 1A, 2A AND 3

FOR MULTIPLE BARRIERS 
FOLLOW STEPS 1B, 2B AND 3

2.0

1.0

3.0

4.0

0

2.0

1.0

3.0

4.0

0

2

1

3

4

0

780mm –1100mm

bar

2

1

3

4

0

bar

780mm –1100mm

780mm –1100mm

1100mm –3300mm

30.7in – 43.3in

780mm –1100mm

30.7in – 43.3in

780mm –1100mm

30.7in – 43.3in

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

780mm –1100mm

30.7in – 43.3in

780mm –1100mm

1100mm –3300mm

30.7in – 43.3in

780mm –1100mm

30.7in – 43.3in

780mm –1100mm

30.7in – 43.3in

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

780mm –1100mm

30.7in – 43.3in

1A.2   Place filler at each corner of the doorstep 

in line with the barrier position

Exterior view of 

Dam Easy

®

 

Flood Barrier installed

Interior view of 

Dam Easy

®

 

Flood Barrier installed

780mm –1100mm

1100mm –3300mm

30.7in – 43.3in

780mm –1100mm

30.7in – 43.3in

780mm –1100mm

30.7in – 43.3in

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

1100mm –3300mm

43.3in – 129.9in

780mm –1100mm

30.7in – 43.3in

Summary of Contents for DME01














Reviews: