46
•
Troubleshooting Problems
Xtium2-CXP PX8 User's Manual
Figure 19: CamExpert PoCXP Parameter
•
If PoCXP is enabled in CamExpert, check that the Video status PoCXP of the respective
connection is green.
Figure 20: CamExpert Video Status Bar
Over-current protection circuit is tripped
To identify this condition:
•
Ensure a CXP camera is connected to the Xtium2-CXP board.
•
Use CamExpert and verify that the PoCXP is enabled.
Verify the Video status PoCXP of the respective connection that requires power; a red status
indicates a tripped state of the over-current protection circuit.
To confirm the tripped state, start SaperaLT Logviewer and search for a message similar to the
following:
“ERR 2017/12/15 11:10:32:307 CorXtium2CXPPX8.SYS: smPoCXP[brd=0, poCxp=0]: 24V TRIP.”
where:
brd: indicates the index of the CXP PX8 board in the system
poCxp: indicates the index of the CXP connector
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
