Dalsa Piranha HS 4x-02K30, User Manual, Page: 56 / 67

56 Piranha HS 4x User’s Manual
03-32-10040-03 PRELIMINARY DALSA Corp.
Command
Function Syntax Parameters Command and Parameter
Description
set analog offset
sao t i
Sets the analog offset.
t
= Tap value.
0
for all taps or
1
-
4
for
individual tap selection.
i
= Controls the digital analog converter
(DAC) in a range from
0
to
1023
, that sets
analog offset. Offset increases with higher
values.
set binning
horizontal
sbh i
Sets the horizontal binning factor.
i
=
1
(factory setting) or
2
set binning
vertical
sbv i
Sets the vertical binning factor.
i
=
1
(factory setting) or
2
set baud rate
sbr i
Sets the speed (baud rate) of the camera
serial communication port.
i
=
9600
,
19200
,
57600
, and
115200
.
Power up baud is always 9600.
set data mode
sdm i
Sets the data mode of the camera where
i
is:
0
= 8 bit, A/B/C/D ports, single processor
1
= 10 bit, A/B/C and D/E/F ports, single
processor
2
= 8 bit, A/B, time multiplexed
3
= 10 bit A/B/C, time multiplexed
set digital offset
sdo t i
Subtracts the input value from the video
signal prior to the PRNU correction. The
first parameter is the tap selection
1
to
4
,
0
for all taps. The second parameter is the
offset in a range from
0
to
511
.
set exposure
mode
sem i
Sets the exposure mode to use where
i
is:
3 =
External SYNC, maximum exposure
time (no shuttering).
7 =
Internal programmable SYNC,
maximum exposure time. Factory setting.
Set FPN
coefficient
sfc i i
Sets an individual pixel’s coefficient value.
i
= The pixel to set in range from
1
to
2048
.
i
= The coefficient value to set in a range
from
0
to
63
.
set gain
sg t f
Sets the analog gain.
t
= Tap value. 0 for all taps or
1
-
4
for
individual tap selection.
f
= Analog gain setting in a range from
–
10
to
10
dB.