Dalsa Piranha HS 4x-02K30, User Manual

Page: 54 / 67

54 Piranha HS 4x User’s Manual
03-32-10040-03 PRELIMINARY DALSA Corp.
B1 All Available Commands
Table 14: All Available Commands
Command
Function Syntax Parameters Command and Parameter
Description
calibrate analog
gain
cag t i
Calibrates the analog offset.
t
= Tap value.
0
for all taps or
1
-
4
for
individual tap selection.
i
= Line average in a range dependent on
the current camera data mode.
64
to
251
DN for 8 bit mode or
256
to
1007
DN for
10 bit mode.
calibrate analog
offset
cao t i
Calibrates the analog offset.
t
= Tap value.
0
for all taps or
1
-
4
for
individual tap selection.
i
= Target value from
1
to
100
DN for 8 bit
mode and
4
to
400
DN for 10 bit mode.
correction
calibrate FPN
ccf [i]
Start FPN coefficient calibration. Use
css
to set sample size. Values range from
1
to
100
DN for 8-bit mode and
4
to
400
DN
for 10-bit.
correction
calibrate PRNU
ccp [i]
Start PRNU coefficient calibration. Use
css
to set sample size. Values range from
64
to
251
DN for 8-bit mode and
256
to
1007
DN for 10-bit.
correction set
sample
css i
Sets the number of line samples averaged
when using the
gl
and
gla
commands.
i
=
16
,
32
,
64
(factory setting)
display pixel
coefficients
dpc [i i]
Display the pixel coefficients in the order
FPN, PRNU, FPN, PRNU, … Optional
pixel start and end values in a range from 1
to sensor pixel count.
end of line
sequence
els i
Sets whether to use an end of line sequence
where
i
is:
0
= End of line sequence disabled
1
= End of line sequence enabled (factory
setting)
enable pixel
coefficients
epc i i
Sets whether pixel coefficients are enabled
or disabled.
The first parameter sets the FPN
coefficients where
i
is:
0
= FPN coefficients disabled
1
= FPN coefficients enabled
The second parameter sets the PRNU
coefficients where
i
is:
0
= PRNU coefficients disabled
1
= PRNU coefficients enabled
Parameters:
t
= tap id
i
= integer value
f
= real number
x1
= pixel start
number
x2
= pixel end
number
[ ]
= optional
parameter