Dalsa Piranha HS 4x-02K30, User Manual, Page: 36 / 67

36 Piranha HS 4x User’s Manual
03-32-10040-03 PRELIMINARY DALSA Corp.
3.12 System Debugging
Setting the Video Mode and Displaying a Test
Pattern
Use the test pattern to verify the proper timing and connections between the camera and
the framegrabber.
The test patterns are:
•
With 8 bit data, each tap has two ramps from 0 to 255 starting with pixel 1.
•
With 10 bit data, each tap has two ramps from 0 to 255 starting with pixel 1 with a
unique offset for each tap.
Tap 1 offset is 0 DN
Tap 2 offset is 256 DN
Tap 3 offset is 512 DN
Tap 4 offset is 768 DN
To set the video mode, use the command:
Syntax:
svm i
Syntax Elements:
i
0
Video mode
1
Generate a test pattern
End-of-line Sequence
To further aid debugging, the camera can generate an end-of-line sequence. The end-of-
line sequence outputs “aa”, “55”, “line counter”, “line average”, “pixels above threshold”,
and “pixels below threshold”.
To activate or deactivate the end-of-line sequence, use the command:
Syntax:
els i
Syntax Elements:
i
0
Deactivate the end-of-line sequence.
1
Activate the end-of-line sequence.
Example:
els 1