Dalsa Pantera TF 11M4 User Manual Download Page 20 | Manualshive

Page: 20 / 68

background image

20

Preliminary

Pantera TF 11M and 6M User’s Manual

DALSA

03-32-10096-03

The shutter control connector provides a direct interface to control an external shutter
and/or a trigger input when the camera is operating in one of the external trigger modes
(refer to section 3.7 Setting Frame Rate, Exposure Time, and Exposure Mode for more
information on operating in external trigger modes). These signals are TTL compatible
(i.e. Vlow_max=0.8V, Vhigh_min=2.4V).

The shutter control output is a signal that is active (high) while the camera is in the
exposure state. For example, if the exposure time is set to 1 second then this signal would
be high for the 1 second exposure and then low while the camera is reading out. This
signal can be used to control an external shutter, opening it when the signal is high and
closing it when the signal is low and preventing image smearing caused by light exposure
during read out. You can also modify the signal using the software commands,

sct

and

scp

. Refer to section 3.8 Controlling the Camera’s Shutter and Strobe for details.

The direct trigger input has the same function as the CC1 control signal on the Camera
Link interface. The specific function of this trigger depends on the camera’s operating
mode but is similar to EXSYNC signal described in section 2.2.2.

A mating connector and cable for this interface is available from DigiKey, PN: 167-1009-
ND (1 meter length).

«
...
18
19
20
21
22
...
»

Summary of Contents for Pantera TF 11M4





































































Reviews:

No comments

Related manuals for Pantera TF 11M4

Brand: Panasonic Pages: 28

Brand: IFM Pages: 9

E-P2 - PEN 12.3 MP Micro Four Thirds Interchangeable Lens Digital...

Brand: Olympus Pages: 164

E-P2 - PEN 12.3 MP Micro Four Thirds Interchangeable Lens Digital...

Brand: Olympus Pages: 164

ePhoto ePHOTO 1280

Brand: AGFA Pages: 66

Brand: TCS Pages: 8

CeilingVIEW SD CCU

Brand: VADDIO Pages: 16

Brand: Conbrov Pages: 36

Brand: OPTRON Pages: 36

Brand: National Geographic Pages: 132

Brand: Vivitar Pages: 41

Brand: FLIR Pages: 2

Brand: Sercomm Pages: 121

Brand: Walimex Pro Pages: 32

Brand: TRASSIR Pages: 2

EF-610 DG SUPER -

Brand: Sigma Pages: 4

Brand: GiiNii Pages: 24

Brand: SICK Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands