52
Piranha4 8k Color Camera User's Manual
03-032-20274-00
Teledyne DALSA
Digital I/O control feature descriptions
The Digital I/O control category, as organized by CamExpert, groups together the sensor
specific parameters. This group includes the controls for line rate, exposure time, scan
direction, and gain. Parameters in gray are read-only, either always or due to another
parameter being enabled or disabled. Parameters in black are user set in CamExpert or
programmable via an imaging application.
The following table describes the digital I / O control parameters along with their view
attributes and the minimum camera firmware version required. Additionally, the firmware
column indicates which parameter is a member of the DALSA Features Naming Convention
(DFNC), versus the GenICam Standard Features Naming Convention (SFNC not shown). The
Device Version number represents the camera software functional group, not a firmware
revision number.
Display Name
Feature
Description
Device Version
& View
Trigger
Selector
TriggerSelector Defines what the trigger initiates (RO)
1.00
Beginner
Trigger
Source
TriggerSource
Defines the source of external trigger
(RO)
1.00
Beginner
Trigger Mode
TriggerMode
Off
On
Determines the trigger mode of the
camera, internal or external (CC1)
External trigger is off: line start is
generated internally.
External trigger is on: line start is
triggered by CC1 rising edge.
1.00
Beginner
