94
Piranha4 4K Camera Color User's Manual
03-032-20180-00
Teledyne DALSA
Full N ame
Help
Mnemonic
H
Argument(s)
D escription
Disp lay list of three letter com m and s
N otes
USER>h
P4 (03-081-20282-85): Command Line Interpreter Mar 15 2013, 09:41:09
bwa - Balance white auto
ccf - Calibrate User FPN <2048|4096>
cls - Camera Link Speed <0 - 85MHz, 1 - 66MHz>
clm - Camera Link Mode <0:Base 1:Med 2:Full 3:Deca>
cms - Color matrix selector <device 0-Factory, 1-User> <Selector 1-2>
cpa - Calibrate Flatfield <0:basic 1:filter><2048|4096><DN target>
ctv - Color transformation value <0-Gain00/1-Gain01/2-Gain02/3-
Gain10/..../8-Gain22/9-Offset1/10-Offset2/11-Offset3> f<value>
ffm - Flat Field Mode <0:Off 1:On 2:Initiliaze 3:Scan direction
controlled>
frs - Set Flatfield Scan Direction Reverse Set <set 1-8>
gcp - Display Camera Configuration
get - Get value '<string>
h - Help
lpc - Load Pixel Coefficients <set 0-8>
rc - Reset Camera
roi - Set Flatfield ROI <1st pixel> <last pixel>
rpc - Reset Flatfield Coefficients
sac - Set AOI Count <value 1-4>
sad - Set AOI Selector, Offset and Width <selector 1-AOI Count> <1st
pixel> <width >= 40>
sam - Set AOI Mode <1-enable, 0-disable>
sbr - Set Baud Rate <9600|57600|115200>
scd - Direction <0:Fwd, 1:Rev 2:Ext>
scl - Select Exposure Time Color Selector <0-All,1-Red,2-Green,3-Blue>
sem - Exposure Mode <0:Int 1:Ext>
set - Exposure Time <ns> Blue Exposure Time must be greater than Red
and Green by 1ms
smm - Mirroring <0:Off 1:On>
spf - Pixel Format <0:RGB8 1:RGB10 2:RGB12>
ssa - Set Line Delay f<0-5>
ssb - Offset <DN>
ssf - Internal Line Rate <Hz>
ssg - Gain <1-Red/2-Green/3-Blue> f<gain>
stm - External Trigger <0:Off 1:On>
svm - Test Pattern <0-2>
usd - Default User Set <0-8>
usl - Load User Set <0-8>
uss - Save User Set <1-8>
vt - Temperature
vv - Input Voltage
USER>
