82
Piranha2 User’s Manual
Revision
Number
Change Description
07
Added the following note (or similar) to these sections, "While settings are
being written to nonvolatile memory, do not power down camera or camera
memory may be corrupted."
1. Section 3.5, page 25, second bullet
2. Page 36, middle of page in calibration section
3. Section 3.18 in the LED description table, Blinking Green section
Added revision history.
08
Fixed incorrect ± character in mechanical drawings.
Updated Colorado Springs address
Added Appendix D: De-rating Curves
Removed maximum DC Offset specification from Specification table in Chapter
1 and added note 6 to refer to Appendix D for DC Offset de-rating curves.
09
Added 8k 30MHz model to:
Table 1: Operating Requirements and Ranges (max line rate)
Table 7: Piranha2 30MHz Timing
10
Added 4k, 10µm model to:
Section 1.2 Image Sensors [Figure 2: IT-P1 4k Image Sensor (2k, 4k (10 µm), 4
tap models) ]
Section 1.3 Camera Performance Specifications (power and power supply
current specs)
11
Added 2k, 4 tap model to:
Section 1.2 Image Sensors [Figure 2: IT-P1 4k Image Sensor (2k, 4k (10 µm), 4
tap models) ]
Section 1.3 Camera Performance Specifications (power and power supply
current, line rate specs)
Added Figure 1: IL-P1 Image Sensor (1k, 2k, 4k (10 µm), 2 tap models) to
Chapter 4, Mechanical Interface
Updated z tolerance from .18mm to .25mm in table 1 and Lens Mount table
(page 47).
03-32-00493-11
DALSA
