Dalsa Linea Lite GigE Series, User Manual

Page: 104 / 175

102
•
Operational Reference Linea Lite GigE Series Camera
Metadata
Selector
ChunkSelector Selects the specific metadata to control, when enabled.
Expert
OffsetX Add the
Horizontal Offset X value used during the image acquisition to
the metadata attached to the image.
OffsetY Add the Offset Y value used during the image acquisition to the
metadata attached to the image. Not available for Linea Lite.
Width Add the
Width value used during the image acquisition to the
metadata attached to the image.
Height Add the
Height value used during the image acquisition to the
metadata attached to the image.
PixelFormat Add the Pixel Format value used during the image acquisition to the
metadata attached to the image.
ExposureTime Add the Exposure Time value used during the image acquisition to the
metadata attached to the image.
cyclingPresetCurrentActiveSet Add the Cycling Preset Current Active Set value used during the image
acquisition to the metadata attached to the image. Not available for
Line Lite.
Timestamp Copies the
Timestamp Value at the start of exposure to the metadata
attached to the image.
LineStatusAll Copies the
Line Status All value at the start of exposure to the
metadata attached to the image.
Gain Add the
Gain feature value used during the image acquisition to the
metadata attached to the image.
Counter1ValueAtReset Copies the value of the Counter Value At Reset feature at the start of
Frame Readout, to the Metadata attached to the image. Supported
only in GenAPI compatibility mode.
DeviceID Add the Device ID value to the metadata attached to the image.
DeviceUserID Add the Device User ID value to the metadata attached to the image.
TestImageSelector Add the Test Image Selector value used during the image acquisition
to the metadata attached to the image.
BinningVertical Add the
Binning Vertical value used during the image acquisition to
the metadata attached to the image.
BinningHorizontal Add the Binning Horizontal value used during the image acquisition to
the metadata attached to the image.
ExposureDelay Add the
Exposure Delay value used during the image acquisition to
the metadata attached to the image. Supported only in GenAPI
compatibility mode.
Metadata Enable ChunkEnable Sets the enable state of the selected metadata. When enabled, the
metadata is included in the payload of the image.
.Expert
False Selected metadata disabled
True Selected metadata enabled.
Chunk Binning
Horizontal
ChunkBinningHorizontal Number of horizontal pixels to combine in the payload image.
Guru
Chunk Binning
Vertical
ChunkBinningVertical Number of vertical pixels to combine in the payload image.
Guru